Sintering and microstuctural characterization of W6+, Nb5+ and Ti4+ iron-substituted BiFeO3

The sintering behaviour and the microstructural evolution of W6+, Nb5+ and Ti4+iron-substituted BiFeO3 ceramics have been analyzed. The obtained results show that W6+ and Nb5+ ions interact with the secondary phases usually present in these materials, thus altering the solid state formation of the BiFeO3 phase. In contrast, Ti4+ ions incorporate into the perovskite structure, leading to an exceptionally low proportion of secondary phases. In addition to this, BiFe0.95Ti0.05O3 materials present a dense microstructure with submicronic and nanostructured grains, clearly smaller than those in the undoped materials

Electrophoretic Deposition of Transparent ZnO Thin Films from Highly Stabilized Colloidal Suspensions

The parameters that control the stability of ZnO-nanoparticles suspensions and their deposition by electrophoretic deposition were studied, so as to organize the assembly and compaction of nanoparticles. The addition of cationic polyelectrolyte - Polyethylenimine (PEI) - with different molecular weights was investigated, in order to study their effectiveness and the influence of the molecular weight of the organic chain on suspensions dispersion. It was found that PEI with the highest molecular weight provided better dispersion conditions. Cathodic EPD was performed under previously optimized suspensions conditions and over electropolished stainless steel substrates. Experimental results showed that the EPD process in these conditions allows obtaining dense transparent ZnO thin films. Deposition times and intensities were optimized by analyzing the resulting thin films characteristics. Finally, the deposits were characterized by FE-SEM, AFM, and different spectroscopic techniques

Soft solution fluorine-free synthesis of anatase nanoparticles with tailored morphology

TiO2 nanoparticles with tailored morphology have been synthesized under exceptionally soft conditions. The strategy is based on the use of a non-aqueous alcoholic reaction medium in which water traces, coming either from the air (atmospheric water) or from an ethanol–water azeotropic mixture (ethanol 96%), are incorporated in order to accelerate hydrolysis of the Ti–precursor. Moreover, organic surfactants have been used as capping agents so as to tailor crystal growth in certain preferential directions. Combinations of oleic acid and oleylamine, which lead to the formation of another surfactant, dioleamide, are employed instead of fluorine-based compounds, thus increasing the sustainability of the process. As a result, TiO2 nanostructured hierarchical microspheres and individual nanoparticles with exposed high-energy facets can be obtained at atmospheric pressure and temperatures as low as 78 °C

Influencia de la segregación de Ti4+ en la respuesta multiferroica de materiales basados en BiFeO3

Los materiales multiferroicos han cobrado un interés creciente en los últimos años dada la potencialidad de sus aplicaciones prácticas. Los materiales basados en BiFeO3 pueden considerarse los más estudiados hasta la fecha dentro de los pocos multiferroicos conocidos. No obstante, sus propiedades aún no son adecuadas para su empleo en dispositivos pues suelen presentar una elevada conductividad eléctrica y/o una respuesta antiferromagnética. La modificación de estos materiales mediante dopado con Ti4+ puede disminuir las pérdidas dieléctricas y proporcionar un comportamiento ferromagnético. Sin embargo, los cambios producidos en la estructura, microestructura y propiedades de los materiales de BiFeO3 como consecuencia del dopado con Titanio no están claros. En este trabajo se presenta una caracterización detallada de cerámicas de composición nominal BiFe0.95Ti0.05O3 con una elevada resistencia y una respuesta magnética extraordinaria. Los resultados evidencian la formación de una nanoestructura relacionada con la segregación del dopante en borde de grano que es la responsable de los cambios producidos en las propiedades magnetoeléctricas de estos materiales

Ejected Particles after Impact Splash on Mars: Aggregates and Aerodynamics

Our earlier laboratory measurements showed that low-velocity sand impacts release fine <5 {\mu}m dust from a Martian simulant soil. This dust will become airborne in the Martian atmosphere. Here, we extend this study by measuring aerodynamic properties of ejecta and characterizing deviations from the behavior of spherical, monolithic grains. We observe the settling of particles emitted as part of an impact splash. The sizes (20 to 280 {\mu}m) and sedimentation velocities (0.1 to 0.8 ms^{-1} ) of the particles are deduced from high-speed videos while the particles sediment under low ambient pressure of about 1 mbar. The particles regularly settle slower than expected, down to a factor of about 0.3. Using optical microscopy, the shape of the captured particles is characterized by simple axis ratios (longest/smallest), which show that the vast majority of particles are irregular but typically not too elongated, with axis ratios below 2 on average. Electron microscopy further reveals that the particles are typically porous aggregates, which is the most likely reason for the reduction of the sedimentation velocity. Due to the reduced bulk density, aggregates up to 10 {\mu}m in diameter should regularly be a part of the dust in the Martian atmosphere.Comment: 8 pages, 7 figure

Biocompatible Probes Based on Rare-Earth Doped Strontium Aluminates with Long-Lasting Phosphorescent Properties for In Vitro Optical IMAGING

In recent decades, the demand for biomedical imaging tools has grown very rapidly as a key feature for biomedical research and diagnostic applications. Particularly, fluorescence imaging has gained increased attention as a non-invasive, inexpensive technique that allows real-time imaging. However, tissue auto-fluorescence under external illumination, together with a weak tissue penetration of low wavelength excitation light, largely restricts the application of the technique. Accordingly, new types of fluorescent labels are currently being investigated and, in this search, phosphorescent nanoparticles promise great potential, as they combine the interesting size-dependent properties of nanoscale materials with a long-lasting phosphorescence-type emission that allows optical imaging well after excitation (so avoiding autofluorescence). In this work, core-shell structures consisting of SrAlO:Eu,Dy luminescent cores encapsulated within a biocompatible silica shell were prepared, showing a green persistent phosphorescence with an afterglow time of more than 1000 s. A high-energy ball milling procedure was used to reduce the size of the starting phosphors to a size suitable for cellular uptake, while the silica coating was produced by a reverse micelle methodology that eventually allows the excitation and emission light to pass efficiently through the shell. Confocal fluorescence microscopy using HeLa cancer cells confirmed the potential of the all-ceramic composites produced as feasible labels for in vitro optical imaging

Microwave-induced fast crystallization of amorphous hierarchical anatase microspheres

The fabrication of hierarchical anatase microspheres with potential photocatalytic properties eventually comprises a consolidation step in which a high degree of crystalline order is typically achieved through conventional electric heating treatments. This however entails a substantial reduction in the specific surface area and porosity of the powders, with the consequent deterioration in their photocatalytic response. Here, we have tested the employ of microwave heating as an alternative energy-saving sintering method to promote fast crystallization. The results obtained suggest that under the microwave radiation, the TiO(2) hierarchical structures can effectively crystallize in a drastically reduced heating time, allowing the specific surface area and the porosity to be kept in the high values required for an improved photocatalytic performance

Zinc oxide-based ceramic varistors

[ES] Los varistores basados en ZnO son dispositivos electrocerámicos caracterizados por una elevada respuesta eléctrica no lineal, que se origina en una microestructura funcional con unas características bien definidas. En el presente artículo de revisión se examina como ha tenido lugar el desarrollo de estos materiales desde su descubrimiento a principios de los años 70. No obstante, a pesar del importante avance tecnológico registrado desde entonces, numerosos aspectos básicos relacionados con su microestructura funcional siguen siendo discutidos a día de hoy.[EN] ZnO-based varistors are electroceramic devices with an extremely high non-linear electrical response, originated on a functional microstructure with well defined characteristics. In the present paper the development of these materials since its discovery in the earlier seventies is reviewed. In spite of the important technological progress achieved, several essential features of its functional microstructure remain however unsolved.Peer reviewe